NeuroDeskBook a Private Consultation
← Back to the NeuroDesk Blog

From Breaker Panel to Phone: Automating the Kunai Games Signage

Moose Salloum, Principal Advisor|July 26, 2026|4 min read
TL;DR
  • →The exterior sign was controlled from the breaker panel, which switched off the entire circuit.
  • →NeuroDesk installed an Aqara relay so staff can control the sign separately from a phone.
  • →Future integrations require checking the exact relay, controller or bridge, and supported features.
  • →The existing sign stayed in place. We only changed how it is controlled.
  • →Small automations can make everyday business tasks much easier.

Kunai Games already had a working exterior sign. The missing piece was easier control. Whenever the sign needed to be turned off, someone had to use the breaker panel, which switched off the entire circuit.

That was the control arrangement staff had available. This project added a more convenient way to switch the sign; it is not an assessment of the original installation's electrical compliance.

Kunai Games exterior signage illuminated while its control is operated from a phone
A still from the field footage showing the Kunai Games exterior sign being controlled from a phone.

Give the sign its own control

NeuroDesk installed an Aqara relay in the signage control path. The sign stayed where it was. Staff gained a simple on and off control from a phone without using the breaker panel.

The sign already worked, so we kept it and made it easier for the team to control.

The installed phone control is the change described here. Any future connection to another smart-home platform needs a review of the exact relay, controller or bridge, and supported features.

NeuroDesk looks for everyday tasks that can be made easier with the equipment a business already has.

What changed at Kunai Games

  • The signage has its own control. Staff do not need the breaker panel for the normal on and off task.
  • The control is available from the phone. It can be used while standing outside and looking directly at the sign.
  • The existing sign was retained. The project improved how the equipment was controlled rather than replacing working signage.
  • The setup has room to grow. Any additional automation needs an assessment of the installed equipment and supported connections.

The kind of task businesses should not have to think about

Projects like this are part of what NeuroDesk does. We notice repetitive tasks that most teams have no reason to think about, then find a practical way to simplify them. In this case, the answer was a relay, phone control, and no need to replace the sign.

If your Windsor or Essex County business still relies on a breaker panel, disconnected switch, or repeated manual routine to control equipment, NeuroDesk can review the operation and design a safer, simpler control path around how the business actually works.

See more NeuroDesk guides in Google.

Add NeuroDesk as a preferred source so Google can show you more of our practical technology articles.

Add NeuroDesk on Google

Connect the systems around your business and remove repetitive operating steps.

Explore the service →

Talk to a specialist.

Send an inquiry about the problem, or email us if you would rather start there.

Start your inquiryEmail NeuroDesk
Read Next
Commercial Automation
Can Your Commercial Security Cameras Read Licence Plates at Night?
November 6, 2026 · 8 min read
Commercial Automation
Can Your Commercial Door Unlock Automatically for Business Hours?
October 24, 2026 · 7 min read
Commercial Automation
Why Is Your Commercial Door Access Card Not Working?
October 20, 2026 · 7 min read

Frequently Asked Questions

Why use a relay instead of the breaker to control a sign?

The breaker switches the entire circuit. A properly selected relay gives the sign its own control, so staff can turn it on or off without affecting other equipment on that circuit.

What does a smart relay do?

A smart relay adds controlled switching to an existing electrical load. In this project, it gave the exterior signage its own phone control without replacing the sign itself.

Can the sign connect to other smart systems later?

That depends on the exact installed relay, controller or bridge, and platform. Confirm those details before promising an integration. This project documents phone control, not an installed Matter connection.

Can business signage also run on a schedule?

A relay based control can often be extended with opening, closing, sunset, or manual override automations. This field note covers the phone control that was actually installed at Kunai Games rather than claiming additional routines that were not part of this demonstration.

Can any exterior sign use the same relay?

No. The relay, enclosure, electrical load, wiring method, and local requirements must be reviewed for the specific installation. This article explains the business result, not a do it yourself wiring procedure.